Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2012 >> Town & Country V6-3.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Tank Pressure Sensor >> Service and Repair >> Fuel Tank Pressure Sensor - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Fuel Tank Pressure Sensor - Installation





INSTALLATION





1. The fuel tank pressure sensor seal (1) can be reused if not damaged.





2. Install the fuel tank pressure sensor (1) into the fuel tank vent tube and rotate into position.





3. Connect the fuel tank pressure sensor electrical connector (1).
4. Install the left rear wheel splash shield Splash Shield - Installation.
5. Lower the vehicle.
6. Install the fuel filler cap.
7. Connect the negative battery cable and tighten nut to 5 Nm (45 in. lbs.).

pro multis · About Operation CHARM