Power Window Switch - Removal

REMOVAL


SWITCH-DRIVER DOOR





1. Disconnect and isolate the battery negative cable.
2. Using a pry tool, gently remove the switch assembly (1) or the vent window switch (2) from the door trim panel.
3. Disconnect the electrical connectors.

SWITCH-PASSENGER DOOR





1. Disconnect and isolate the battery negative cable.
2. Using a pry tool, gently remove the switch assembly from the door trim panel.
3. Disconnect the electrical connector.

SWITCH-SLIDING DOORS





1. Disconnect and isolate the battery negative cable.
2. Using a pry tool, gently remove the switch assembly from the door trim panel.
3. Disconnect the electrical connector.