Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2013 >> 200 L4-2.4L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Block Assembly >> Service and Repair >> Removal and Replacement >> Ladder Frame - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ladder Frame - Installation







INSTALLATION






NOTE:
When using RTV, the sealing surfaces must be clean and free from grease and oil.

NOTE:
When using RTV, parts should be assembled in 10 minutes and tighten to final torque within 45 minutes.

1. Apply a 2 mm bead of Mopar(R) engine sealant RTV or equivalent as shown.





2. Install bolts and tighten as shown following a two step method.

- First: All to 10 Nm (89 in. lbs.).

- Second: All to 26 Nm (19 ft. lbs.).

3. Install balance shaft module Engine Oil Pump - Installation.

4. Install oil pan Engine Oil Pan - Installation.

pro multis · About Operation CHARM