Wiper Blade - Installation

INSTALLATION






CAUTION:
Do not allow the wiper arm to spring back against the glass without the wiper blade in place or the glass may be damaged.

1. Lift the wiper arm (2) off of the windshield glass, until the wiper arm hinge is in its over-center position.

2. Position the wiper blade (1) near the receptacle formation on the tip of the wiper arm with the latch side of the blade pivot block oriented towards the end of the wiper arm that is nearest to the wiper pivot.

3. Push the wiper blade pivot block into the wiper arm receptacle until the latch tab (3) snaps into place with an audible click.
4. Gently lower the wiper blade and element onto the glass.