Spark Plug - Removal

3.6L

NOTE:
The LH ignition coils are shown, the RH ignition coils are similar.

1. Remove the ignition coil (2) .

2. Prior to removing the spark plug, spray compressed air into the cylinder head opening. This will help prevent foreign material from entering the combustion chamber.

CAUTION:
The spark plug tubes (1) are a thin wall design. Avoid damaging the spark plug tubes. Damage to the spark plug tube can result in oil leaks.

3. Remove the spark plug from the cylinder head using a quality thin wall socket with a rubber or foam insert.

4. Inspect the spark plug condition.