Starter - Removal

3.6L






1. Disconnect and isolate the negative battery cable.

2. Raise and support the vehicle Service and Repair.

3. Remove the catalytic converter (3) Catalytic Converter - Removal.





4. Remove the front engine mount through bolt.

5. Remove the bolts (2) from the front engine mount bracket (1) and remove the bracket.





6. Disconnect the starter solenoid electrical connector (1) from the starter solenoid terminal.

7. Remove the battery cable nut and battery cable from the solenoid stud (2).

8. Remove the starter mounting bolts (4).

9. Remove the starter assembly (3) from the transmission.