Front

REMOVAL

NOTE:
Before proceeding, Warning Brakes - Caution .

1. Raise and support the vehicle. Service and Repair

NOTE:
Perform Step 2 through Step 5 on each side of the vehicle to complete pad set removal.





2. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1).





CAUTION:
When removing or installing a caliper guide pin bolt, it is necessary to hold the guide pin stationary while turning the bolt. Hold the guide pin stationary using a wrench placed upon the pin's hex-shaped head.

3. Remove the two brake caliper guide pin bolts (2, 3).

4. Remove the disc brake caliper (4) from the disc brake adapter bracket (1) and hang it out of the way using wire or a bungee cord. Use care not to overextend the brake hose when doing this.





5. Remove the brake pads (4, 5) from the caliper adapter bracket (2).