Front

HUB AND BEARING

- Tools Required
- 500-20 Hex Nut
- J-36661-2 Forcing Screw
- J-37105-B-1 Support Bridge
- J-37105-B-2 Bearing Adapter
- J-37105-B-3 Hub Adapter

Disassembly Procedure





1. Remove the drive axle from the front wheel hub.
2. Remove the inner snap ring.





3. Remove the wheel hub with the support bridge J-37105-B-1, the hub adapter J-37105-B-3, the hex nut 500-20, and the forcing screw J-36661-2.





4. Remove the brake shield.
5. Remove the outer snap ring.





6. Remove the wheel bearing with the support bridge J-37105-B-1, the bearing adapter J-37105-B-2, the hex nut 500-20, and the forcing screw J-36661-2.
7. Clean the bore of the knuckle.

Assembly Procedure





1. Install the outer snap ring and push the wheel bearing into place with the support bridge J-37105-B-1, the bearing adapter J-37105-B-2, the hex nut 500-20, and the forcing screw J-36661-2.
2. Install the brake shield.





3. Install the inner snap ring and push the wheel hub into place with the hub adapter J-37105-B-3, the bearing adapter J-37105-B-2, the hex nut 500-20, and the forcing screw J-36661-2.
4. Install the drive axle into the front wheel hub.