Planetary Gear and Planetary Sun Gear

PLANETARY GEAR AND PLANETARY SUN GEAR

Disassembly Procedure

WARNING: USE CAUTION WHEN REMOVING SNAP RINGS OR PERSONAL INJURY MAY RESULT.





1. Carefully remove the snap ring.





2. Remove the rear planetary ring gear flange.





3. Inspect the planetary gear assembly.
- Using a dial indicator, measure the inner diameter of the planetary gear bushing. Measure the bushing at three different places and calculate the average. If it is greater than the maximum, replace the planetary gear assembly.





4. Inspect the planetary sun gear.
- Using a dial indicator, measure the inner diameter of the planetary sun gear bushing. Measure the bushing at three different places and calculate the average. If it is greater than the maximum, replace the planetary sun gear.

Assembly Procedure
1. Clean the components using a clean, high-quality parts cleaning solvent and use compressed air to dry all parts. Inspect all parts for damage or wear.





2. Install the rear planetary ring gear flange.





3. Install the snap ring.