Manual Shaft, Detent Lever, Park Lock Installation
MANUAL SHAFT, DETENT LEVER, PARK LOCK INSTALLATIONTools Required
J 41229 Manual Shaft to Case Pin Installer
1. Install a new manual shaft seal (809) into the case (51). Use a 13 mm socket.
2. With the manual valve to detent lever link (802) and the parking lock actuator assembly (807) attached, install the manual shaft and detent lever assembly (806) into the case.
3. Ensure that the parking lock actuator rod is correctly positioned into the actuator guide.
Important: Install the manual shaft pin at the correct height in order to properly secure the manual shaft. The J 41229 provides the correct installation height. If you install the pin too deep, the case boss might crack.
4. Install the manual shaft pin (803) into the case. Use the J 41229.