Windshield Washer Hoses

(Typical)

Removal Procedure




1. Remove the cowl vent grille.
2. Disconnect the windshield washer hose from the washer nozzles.




3. Remove the front left wheel.
4. Remove the bolts and the screws and the front wheel well splash shield.
5. Disconnect the washer hose from the washer reservoir.
6. Remove the washer hose.

Installation Procedure




1. Install the washer hose.
2. Connect the washer hose to the washer pump.






NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

2. Install the front wheel well splash shield with the bolts and the screws.

Tighten
Tighten the wheel well splash shield bolts to 1.5 Nm (13 lb.in).

3. Install the front left wheel.
4. Connect the windshield washer hose to the washer nozzles.
5. Install the cowl vent grille.