Front Bucket Seat Track

(Power Driver Seat Shown, Manual Driver Seat Similar)

Removal Procedure




1. Remove the seatback.
2. Remove the seat trim.
3. Remove the seat cushion bolts.
4. Remove the seat track from the seat cushion.

Installation Procedure




1. Install the cushion onto the seat track.

NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

2. Install the seat track to the seat cushion with the seat cushion bolts.

Tighten
Tighten the front seat cushion bolts to 12 N.m (106 lb.in).

3. Install the seat trim.
4. Install the seatback.