Front Seat Trim

Removal Procedure

(Power Driver Seat Shown, Manual Driver Seat Similar)




1. Remove the front bucket seat from the vehicle.
2. Remove the screw and the recliner lever.
3. Remove the screws and the front seat trim.

Installation Procedure

NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.




1. Install the front seat trim with the screws.

Tighten
Tighten the front seat trim screws to 12 N.m (106 lb.in).

2. Install the recliner lever with the screw.

Tighten
Tighten the seat recliner lever screw to 12 N.m (106 lb.in).

3. Install the front bucket seat in the vehicle.