Headlamps

Removal




1. Disconnect the negative battery cable.
2. Remove the headlamp mounting bolts.




3. Disconnect the electrical connectors.
4. Remove the headlamp assembly.
5. Remove the cap concealing the headlamp bulb.
6. Disconnect the headlamp bulb electrical connector.
7. Remove the headlamp bulb.

Installation




1. Install the headlamp bulb.
2. Connect the headlamp bulb electrical connector.
3. Install the cap concealing the headlamp bulb.
4. Connect the electrical connectors.

NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

5. Install the headlamp assembly with the bolts.
6. Connect the negative battery cable.




Tighten
Tighten the headlamp assembly bolts to 4 N.m (35 lb-in).