Enabling the SIR System

1. Turn the ignition switch to LOCK and remove the key.
2. Connect the pretensioner connector (both side).
3. Install the lower B-pillar trim. Refer to Interior Trim.




4. Connect the yellow connector at the passenger airbag.
5. Install the glove box. Refer to Instrumentation/Driver Information.




6. Connect the yellow clockspring connector at the lower steering column.
7. Install the instrument panel lower cover.
8. Staying well away from the inflator modules, turn the ignition switch to ON, and verify that the AIRBAG indicator flashes seven times and then turns OFF. If it does not operate as described, perform the SIR Diagnostic System Check.