Rear Door Window Glass: Service and Repair

REAR DOOR GLASS

REMOVAL PROCEDURE




1. Remove the rear door trim panel. Refer to Interior Trim.

2. Remove the outside channel molding. Refer to Doors.

3. Remove the interior rear door garnish molding.

4. Remove the screws and the exterior rear door garnish molding.




5. Remove the door seal trim. Refer to Doors.

6. Remove the screws that secure the glass to the window regulator.




7. Remove the bolts and the guide rail.

8. Remove the glass from the door.

INSTALLATION PROCEDURE




1. Install the glass in the door.
2. Install the guide rail and the bolts.

Tighten
Tighten the guide rail bolts to 7 N.m (62 lb-in).




3. Position the glass within the window regulator.

4. Install the glass screws.

Tighten
Tighten the door glass screws to 7 N.m (62 lb-in).




5. Install the door seal trim. Refer to Doors.

6. Install the exterior rear door garnish molding with the screws.

Tighten
Tighten the exterior rear door garnish molding screws to 1.5 N.m (13 lb-in).

7. Install the interior rear door garnish molding.

8. Install the outside channel molding. Refer to Doors.

9. Install the rear door trim panel. Refer to Interior Trim.