1B Speed Control Switch Inputs

1. Connect the diagnostic read-out tool.
2. Put the system into the Sensor Test Mode 09.
3. Make sure speed control switch is in the Off position.
4. While looking at the display, move the on/off switch to the On position, press the Set button and press the Resume button, record all readings.
5. If test indication is On-00, Set-10, and Resume-01, proceed to Test 3.
6. If test indication is On-blank, Set-blank, and Resume-blank, proceed to Test 4.
7. If test indication is On-blank, Set-10, and Resume-10, proceed to Test 5.
8. If test indication is On-00, Set-00, and Resume-00, proceed to Test 6.