Window Regulator Handle - Removal Procedure
88chrysler13Models
1989 Colt Hatchback
Subject
Window Regulator Handle Removal Procedure
Index
BODY
Date
November 14, 1988
No.
23-19-88
P-4791
(23-24)
This bulletin covers the removal procedure of the window crank handles on the Colt hatchback with integrally moulded door trim.
FIGURE 1:
REPAIR PROCEDURE
1. Fabricate the following tool as an aid to removing the window regulator handle.
Flatten the end of wire approximately 170 mm long with a diameter of 2 mm and form it as illustrated in Figure 1.
FIGURE 2:
2. While pulling the window regulator handle outward, push the door trim in to provide clearance between the trim and the handle escutcheon (see Figure 2).
FIGURE 3:
3. Insert the tool between the trim and the handle escutcheon. Engage the tool with the leg of the clip as illustrated and pull it toward you to remove the clip (see Figure 3).
4. Remove handle.
POLICY: Information only