Operation CHARM: Car repair manuals for everyone.

Turn Signal Switch - Canceling Pin Indexing

89chrysler01

Models


1988 & 1989 AA-, AB-, AC-, AD-, AG-, AH-, AJ-, AK-, AL-, AM-, AN-, & AP-Body Equipped With Non-tilt Steering Column


Subject


Turn Signal Switch Canceling


Index


ELECTRICAL


Date

January 30, 1989

No.


08-03-89

P-196

(C08-03-9)
BODY CODE LEGEND

AA - Spirit/Acclaim AK - Aries/Reliant
AB - Dodge Ram/Van Wagon AL - Omni/Horizon
AC - Dynasty/New Yorker/Landau AM - Diplomat/Gran Fury/
AD - Dodge Ram Pickup/ Fifth Avenue
Ramcharger Sport Utility AN - Dodge Dakota/
AG - Daytona Dakota/Sport
AH - Lancer/LeBaron GTS AP - Shadow/Sundance
AJ - Lebaron

SYMPTOM/CONDITION

Turn signals do not cancel properly after the steering wheel has been removed and reinstalled.

REPAIR PROCEDURE

Anytime the steering wheel is removed and replaced on nontilt columns, there is the possibility that the turn signals will not cancel properly until the pin in the steering wheel is properly indexed with respect to the turn signal switch.

The following procedure should be used to ensure the turn signal cancel feature operates correctly.

1. Engage the turn signal lever in either the right turn or the left turn position.

2. While holding the turn signal lever to prevent movement, rotate the steering wheel two complete turns (or until the wheel stops) in the direction opposite the direction of the turn signal lever.

Example: If the turn signal lever is moved downward to the left, rotate the steering wheel to the right. If the turn signal lever was moved upward to the right, then rotate the steering wheel to the left.
3. Release the turn signal lever and then return the steering wheel to the straight ahead position.

4. To check for proper canceling operation, engage the turn signal lever and then turn the steering wheel at least one-half revolution in the same direction in which the turn signal switch is engaged.

5. Return the steering wheel to the straight ahead position. The turn signal switch should cancel at this time.

6. Repeat Steps 4 and 5 to check the cancel feature in the opposite direction.


POLICY: Information only