General Valve Specifications
<cf222001-002>| Stem Diameter | Intake | 0.372-0.373 Note: Standard diameter. Valve should be replaced if wear exceeds 0.002 inch |
| Exhaust | 0.371-0.372 Note: Standard diameter. Valve should be replaced if wear exceeds 0.002 inch. | |
| Installed Height | - Note: Installed height is measured w/gauge C-396B | |
| Maximum Tip Refinish | - Note: Valves may be ground to correct installed height unless they are equipped w/rotators. If valves are equipped w/rotators, do not grind stem tips | |
| Face Angle | 44.5-45 | |
| Margin Note: Minimum | Intake | 0.0469 |
| Exhaust | 0.0469 |