Control Module HVAC: Service and Repair

Power/Vacuum Module Replacement

Power Vacuum Module Attachment (typical):

The power/vacuum module (PVM) is located in the heater, A/C housing above and to the right of the floor hump.


REMOVAL AND INSTALLATION
1. Remove glove box and valance assembly (see Group 8E).
2. Remove four PVM attaching screws.
3. Disengage and unplug all wire and vacuum connectors.

Power Vacuum Module:

4. Gently extract PVM from heater-A/C housing and remove from under instrument panel.

To install, reverse the preceding operation.