MAP Sensor - DTC's 13 or 14 Set
90chrysler01Models
1987-90 AA, C/AC, E, G/AG, H/AH, J/AJ, K/AK, P/AP, S/AS Bodies
Subject
MAP Sensor ReplacementVehicles With 2.2L EFI, 2.5L EFI or 3.0L Engines
Index
DRIVEABILITY
Date
January 29, 1990
No.
18-03-90
(C18-20-9)
P-164
BODY CODE LEGEND
AA - ACCLAIM/,SPIRIT LEBARON LANDAU
C/AC - DYNASTY/NEW YORKER LANDAU/SALON
E - CARAVELLE/600
G/AG - DAYTONA
H/AH - LANCER/LEBARON GTS
J/AJ - LEBARON COUPE/LEBARON CONVERTIBLE
K/AK - ARIES/RELIANT
P/AP - SHADOW/SUNDANCE
S/AS - CARAVAN/GRAND CARAVAN/CARAVAN C/V
VOYAGER/GRAND VOYAGER/TOWN & COUNTRY
SYMPTOM/CONDITION
The Driveability Test Procedure reveals a fault code (13 or 14) or a fault message (MAP Pneumatic Signal, MAP Pneumatic Change, or MAP Voltage too Low [or too High]), set in the vehicle diagnostic memory.
PARTS REQUIRED
1 MAP Sensor PN 5227351
1 Sensor Hose (3.0L Engine Only) PN 4557138
REPAIR PROCEDURE
When it is necessary to replace the MAP sensor, use Part Number 5227351 as the replacement part on all vehicles listed under Models above. Additionally, for 3.0L applications, replace the MAP sensor-to-intake manifold hose with Part Number 4557138. Refer to the appropriate Service Manual for replacement procedures.