Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Hall Effect Sensor: Service and Repair

Distributor Cap:

REMOVAL/INSTALLATION

1. Remove splash shield and distributor cap by removing both distributor cap hold down screws.
2. Remove rotor from distributor shaft.
3. Remove Hall effect pick-up assembly.
4. When installing Hall effect assembly make sure pick-up leads are correctly routed to avoid damage.
5. Reinstall distributor rotor.
6. Reinstall distributor cap and splash shield.
7. Set timing, refer to ADJUSTMENTS PROCEDURES.