Removal

Fig 2 Removing Or Installing (Allen Head) Key Retaining Screw:

1. Block brake pedal in the up position.
2. Raise vehicle to a comfortable working height and install jack stands.
3. Remove wheel and tire assembly.
4. Remove key retaining allen screw holding caliper to adaptor.

Fig 3 Removing Caliper Lock And Spring:

5. Tap adaptor lock and spring from between caliper and adaptor.
6. Carefully separate caliper from adaptor.
- Hang caliper out of the way.
- Do not allow caliper to hang or be supported by hydraulic brake hose.
- Inner brake shoe will remain on adaptor.