System Specifications
<cf214026-001>| Rear Axle | Ring Gear Size | 9 1/4 | |
| Ring Gear & Pinion Backlash | Method | - Note: Threaded Adjuster. | |
| Adjustment | 0.006-0.008 | ||
| Pinion Bearing Preload | Method | - Note: Collapsible Spacer. | |
| New Bearings | 20-35 | ||
| Used Bearings | - Note: Set At 10 Inch Lbs. Greater Than Reading Taken At Time Of Tear Down With Minimum Of 210 Ft. Lbs. Torque On pinion Nut. | ||
| Dfferential Bearing Preload | Method | - Note: Threaded Adjuster. | |
| New Bearings | - Note: Preload Is Correct When Ring Gear And Pinion Back- Lash Is Properly Adjusted. | ||
| Used Bearings | - Note: Preload Is Correct When Ring Gear And Pinion Back- Lash Is Properly Adjusted. |