Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 1994 >> Intrepid V6-201 3.3L >> Repair and Diagnosis >> Starting and Charging >> Charging System >> Testing and Inspection >> Output Voltage Test
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Output Voltage Test

1. Ensure battery is fully charged.

Fig. 3 Output Voltage Test.:




2. Connect voltmeter leads across battery terminals as shown.
3. Record base voltage with all electrical components and ignition switch in Off position.
4. Place transaxle in park position and apply parking brake.
5. Start engine.
6. With engine at 1800 RPM and no other electrical loads, battery voltage should not be more than 2.7 volts above base voltage. If voltage is not as specified, perform on-board diagnostics procedures for overcharging.
7. Record battery voltage with engine at 2400 RPM, blower motor on high speed and headlamps on high beam. Battery voltage should be a minimum of 0.4 volts above base voltage. If voltage is not as specified, perform on-board diagnostic procedures for inadequate or low charging.
pro multis · About Operation CHARM