Fuel Delivery and Air Induction: Specifications

Air fuel control (AFC) line fitting 24 Nm (18 ft lb)

Banjo fitting at top of filter/separator 24 Nm (18 ft lb)

Banjo fitting at side of fuel injector 8 Nm (6 ft lb)

Banjo fitting (fuel supply line at side of injector pump) 30 Nm (22 ft lb)

Engine speed sensor bolts/nuts 24 Nm (18 ft lb)

Fuel drain manifold fitting bolts at injectors 8 Nm (6 ft lb)

Fuel filter 1/2 turn after contact

Fuel hose clamps (low pressure) 1 Nm (15 in lb)

Fuel injector retaining nut 60 Nm (44 ft lb)

Fuel tank nuts 9 Nm (80 in lb)

Fuel transfer pump mounting bolts 24 Nm (18 ft lb)

High-pressure fuel lines at delivery valve clamp isolator bolts 30 Nm (22 ft lb)

High-pressure fuel lines at fuel injector 30 Nm (22 ft lb)

High-pressure fuel line clamp holders 6 Nm (4 ft lb)

Injector pump access plug 15 Nm (11 ft lb)

Injection pump to injection pump gear nut 165 Nm (122 ft lb)

Injector pump mounting nuts 24 Nm (18 ft lb)

Intake manifold air temperature sensor 28 Nm (20 ft lb)

Intake manifold air heater relay bolts 4.5 Nm (40 in lb)

Low-pressure bleed screw 8 Nm (6 ft lb)