Front Door Panel: Service and Repair
FRONT DOOR TRIM PANEL REMOVAL1. Release door latch and open door.
2. Roll window down.
Window Crank:
3. Remove window crank, if equipped.
Door Trim Panel:
4. Remove screws holding door trim panel to door from inside arm rest pull cup.
Power Window/Lock Switch Panel:
5. Disengage clips holding power window/lock switch panel to door trim panel. Disengage wire connectors from switch panel, if equipped.
6. Remove screw holding door trim to outside mirror frame.
7. Using a trim panel removal tool, disengage clips holding door trim to door around perimeter of trim panel.
8. Disengage power mirror wire connector, if equipped.
9. While holding bottom of trim panel away from door, simultaneously lift upward and forward.
10. Separate door trim panel from inner belt weatherstrip.
11. Disengage power outside mirror wire connector from control switch.
12. Separate door trim panel from vehicle.
13. Reverse the preceding operation for installation.
FRONT DOOR WATER DAM REMOVAL
1. Remove door trim panel.
Door Water Dam:
2. Peel water dam away from adhesive around perimeter of inner door panel.
3. Reverse the preceding operation for installation.