Front Bearing Retainer Seal
REMOVAL1. Remove release bearing and lever from the transmission.
2. Remove the bolts holding the front bearing retainer to the transmission case.
3. Remove the front bearing retainer from the transmission case.
4. Using a suitable pry tool, remove the front bearing retainer seal.
INSTALLATION
Install Front Bearing Retainer Seal:
1. Using Tool Handle C-4171 and Seal Installer 8209, install new seal in to the front bearing retainer.
2. Remove any residual gasket material from the sealing surfaces of the bearing retainer and the transmission case.
3. Install new front bearing retainer gasket to the front bearing retainer.
4. Install the front bearing retainer onto the transmission case.
5. Install the bolts to hold the bearing retainer onto the transmission case.
6. Tighten the bolts to 17 Nm (12 ft. lbs.).
7. Install release bearing and lever onto the transmission.