Sliding Door Upper Hinge

Sliding Door Upper Hinge And Guide Wedge:

REMOVAL
1. Remove sliding door upper frame molding and pull handle.
2. Remove sliding door upper track cover.
3. Remove upper track over travel stop.
4. Mark hinge location on sliding door for reference points when installing.
5. Support Sliding door on a suitable lifting device.
6. Remove bolts holding hinge to sliding door.
7. Separate hinge from sliding door.
8. Slide hinge from open end of track at rear of door opening.

INSTALLATION
Reverse the preceding operation. Align sliding door to 6 mm (0.240 in.) gap to edge of quarter panel and B-pillar, 7 mm (0.280 in.) gap to rocker and flush across gaps.