Right D-Pillar Trim Panel

RIGHT D-PILLAR TRIM PANEL


REMOVAL

1. Remove rear header trim cover.

2. Remove liftgate Sill plate.

3. Remove second rear seat belt turning loop on long wheel base vehicle.

4. Remove bolt holding second rear seat belt, if equipped, anchor to quarter on short wheel base vehicle.

5. Remove quarter trim bolster on short wheel base vehicle.

6. Remove screws holding trim panel to attaching bracket on short wheel base vehicle.

7. Disengage hidden clips holding trim to D-pillar.

8. Separate D-pillar trim panel from D-pillar.

9. Disengage speaker wire connector, if equipped.

10. Pass second rear seat belt, if equipped, through slot in trim panel on short wheel base vehicle.

11. Separate D-pillar trim from vehicle.





Right Quarter and D-Pillar Trim Panels - SWB






Right Quarter and D-Pillar Trim Panels - LWB with out A/C






Right Quarter and D-Pillar Trim Panels - LWB with A/C


INSTALLATION

1. Position D-pillar trim on vehicle.

2. Pass second rear seat belt, if equipped, through slot in trim panel on short wheel base vehicle.

3. Engage speaker wire connector to speaker, if equipped.

4. Align locating pins on backside of trim panel to mating holes in D-pillar.

5. Engage hidden clips to hold trim to D-pillar.

6. Install screws to hold trim panel to attaching bracket on short wheel base vehicle.

7. Install quarter trim bolster on short wheel base vehicle.

8. Install bolt to hold second rear seat belt, if equipped, anchor to quarter on short wheel base vehicle.

9. Install second rear seat belt turning loop on long wheel base vehicle.

10. Install liftgate sill plate.

11. Install rear header trim cover.