Keyless Entry: Description and Operation

The key fob transmitter has three buttons to actuate and program the Remote Keyless Entry (RKE) system.

^ UNLOCK: Actuating the UNLOCK button once Will unlock the driver door and activate the illuminated entry system and disarm security alarm system, if equipped. Actuating the UNLOCK button twice within five seconds will unlock all doors and activate the illuminated entry system.

^ LOCK: Actuating the LOCK button locks all doors and sounds horn (chirp) and arm the security alarm system. The chirp verifies the door lock operation.

^ PANIC: Actuating the PANIC button sounds the horns at half second intervals, flashes the exterior lamps, and turns ON the interior lamps. The panic alarm will remain on for three minutes, until the PANIC button is actuated again or the ignition is switched to the RUN position.

^ The Remote Keyless Entry Module is capable of retaining the transmitter Vehicle Access Code (VAC) in memory even after vehicle power has been interrupted.

^ The RKE system activates the memory seat and mirror system, if equipped. Two primary key fob transmitters can be programmed to actuate memory seat and mirror setting 1 or 2. Additional two key fobs can be added but will not actuate the memory seat and mirror system.