Vehicle Damage Warnings

Certain components of the anti-lock brake system are not intended to be serviced individually. Attempting to remove or disconnect components of this type may result in personal injury and/or improper system operation. Only the components with removal and installation procedures should be serviced.

Observe the following general precautions when servicing the anti-lock brake system:

1. If any welding work is to be performed using an arc welder, Controller Anti-Lock Brake (CAB) should be disconnected.
2. When ignition switch is in On position, CAB electrical connector should not be disconnected or connected.
3. Some components of the ABS system are not serviced separately and must be serviced as complete assemblies. Do not disassemble any component which is designated as non-serviceable.