State Display Inputs and Outputs

NOTE: Since switch inputs to the PCM have only two recognized states, HIGH and LOW, the PCM cannot recognize, an open circuit, a shorted circuit, or a defective switch.

- If a switch state seen by the PCM changes when the switch is operated, it can be assumed that the switch and circuit to the PCM are functional.

Procedure:
1. Connect the scan tool to the vehicle and access the State Display screen.
2. Access Inputs and Outputs.

3. The following is a list of accessible Inputs and Outputs:


State Display Inputs
- Park/Neutral Switch (Automatic Transaxle Only)
- Speed Control Resume
- Brake Switch
- Speed Control ON/OFF
- Speed Control Set
- A/C Switch Sense
- Z2 Voltage Sense
- B1 Voltage Sense

State Display Outputs
- S/C (Speed Control) Vent Solenoid
- S/C (Speed Control) Vacuum Solenoid
- Torque Converter Clutch Solenoid (3 Speed Automatic Transaxle)
- A/C Clutch Relay
- EMR Lamp
- Auto Shutdown Relay
- Radiator Fan Relay
- Purge Solenoid
- Malfunction Indicator Lamp (MIL) - (Check Engine Lamp)

4. Follow scan tool manufacturer's instructions to check operation of circuits.