Ignition Coil

Fig. 24 Ignition Coil Pack:

CONSTRUCTION
The coil assembly consists of 2 coils molded together. The coil assembly is mounted over the valve cover (Fig. 24). High tension leads route to each cylinder from the coil.

OPERATION
The coil fires two spark plugs every power stroke.
- One plug is the cylinder under compression
- The other cylinder fires on the exhaust stroke.

Coil number one fires cylinders 1 and 4.

Coil number two fires cylinders 2 and 3.

The PCM determines which of the coils to charge and fire at the correct time.

CIRCUIT OPERATION
The Auto Shutdown (ASD) relay provides battery voltage to the ignition coil.

The PCM provides a ground contact (circuit) for energizing the coil.
- When the PCM breaks the contact, the energy in the coil primary transfers to the secondary causing the spark.
- The PCM will de-energize the ASD relay if it does not receive the crankshaft position sensor and camshaft position sensor inputs.

NOTE: Refer to Auto Shutdown (ASD) Relay-PCM Output for relay operation.