Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 1995 >> RAM 2500 Van V8-318 5.2L Magnum >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Vehicle Speed Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Vehicle Speed Sensor: Service and Repair




Fig. 18 Vehicle Speed Sensor Location - 2WD:






REMOVAL
1. Raise and support vehicle.
2. Disconnect the electrical connector from the sensor.
3. Remove the sensor mounting bolt.

Fig. 105 Sensor Removal/Installation:






4. Remove the sensor (pull straight out) from the speedometer pinion gear adapter. Do not remove the gear adapter from the transmission.

INSTALLATION
1. Clean the inside of speedometer pinion gear adapter before installing speed sensor.
2. Install sensor into speedometer gear adapter and install mounting bolt. Before tightening bolt, verify speed sensor is fully seated (mounted flush) to speedometer pinion gear adapter.
3. Tighten sensor mounting bolt to 2.2 N.m (20 in. lbs.) torque.
4. Connect electrical connector to sensor.

pro multis · About Operation CHARM