Test 39A - CAB Failure Verification Test

Test 39A: CAB Failure Verification Test:

NOTE: When connecting or disconnecting connectors and inspecting connectors clean and repair as necessary.

NOTE: After completion of a repair or test then perform Verification Test. Verification Test VER-1A - ABS

INACTIVE TROUBLE CODE CONDITION
You have just attempted to simulate the condition that initially set the trouble code message. The following additional checks may assist you in identifying a possible intermittent problem:
^ Visually inspect related wire harness connectors. Look for broken, bent, pushed out, or corroded terminals.
^ Visually inspect the related harnesses. Look for chafed, pierced, or partially broken wire.
^ Refer to any technical service bulletins that may apply.

Controller-Antilock Brake Connector: