Driver Side Airbag Module Replacement

WARNING:
This system is a sensitive, complex electro-mechanical unit. Before attempting to diagnose, remove or install the airbag system or related steering wheel and steering column components, you must first disconnect and isolate the battery negative (ground) cable. Then wait two minutes for the system capacitor to discharge before further system service. This is the only sure way to disable the airbag system. failure to do this could result in accidental airbag system deployment and possible personal injury.
When removing a deployed airbag module, rubber gloves, eye protection, and a long-sleeved shirt should be worn. There may be deposits on the airbag module and other interior surfaces. In large doses, these deposits may cause irritation to the skin and eyes.

1. Disconnect and isolate the battery negative cable. If the airbag module is undeployed, wait two minutes for the system capacitor to discharge before further service.




2. From the underside of the steering wheel, remove the screws that secure the speed control switch or trim bar to the steering wheel.
3. Pull the switches or trim bar away from the steering wheel. If equipped with speed control, unplug the wire harness connector from the switch.
4. Remove the four nuts that secure the airbag module to the steering wheel.
5. Pull the airbag module away from the steering wheel far enough to unplug the clockspring wire harness connector from the back of the airbag module.
6. Remove the airbag module from the steering wheel.
7. when installing, connect the clockspring wire harness connector to the module by pressing straight in on the connector. The connector should latch securely beneath the module connector locking clip arms to assure positive connection.
8. Install the four airbag module mounting nuts and tighten to 9 to 11 N.m (80 to 100 in. lbs.).
9. Install the speed control switch or trim bar, as equipped.
10. Do not connect the battery negative cable at this time. See Testing and Inspection/Procedures for the proper procedures.