Alignment: Description and Operation

This vehicle is equipped with a non-adjustable front caster and camber suspension. Front caster and camber settings are determined at the time of design and require no adjustment during alignment. Though not adjustable, front caster and camber must be checked and components replaced when outside of vehicle specification. Inspect all components for damage or signs of bending and replace as required. Prior to checking or adjusting front or rear suspension alignment, inspect suspension components and wheel bearings for damage or excessive wear and replace as needed. Ensure tire pressure is properly adjusted, then raise and release front or rear bumper several times to allow vehicle to assume ride height. Toe, measured in degrees or inches, is the amount of difference in distance between the front and rear tire edges.