Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Component Tests and General Diagnostics

1. Ensure ignition switch is in the OFF position, then disconnect wiring harness at coolant temperature sensor and connect an ohmmeter between sensor terminals.
2. Measure resistance between sensor terminals. Resistance should be 7.0-13.0 Kohms.
3. Run engine until coolant temperature reaches approximately 200°F, then measure resistance. Resistance should be .7-1.0 Kohms.
4. Measure wiring harness resistance between Powertrain Control Module (PCM) terminal 26 and coolant sensor harness connector. Resistance should not exceed 1 ohm.
5. If resistance is not as specified, replace coolant sensor or repair wiring harness.