Tightening Specifications

Component Torque/Ft. Lbs.

Alternator Mounting Bolts [01]
Camshaft Sprocket Bolt 75
Connecting Rod Cap Bolt [02]
Crankshaft Pulley Bolt 100
Cylinder Head [03]
EGR Tube 16-17
Engine Coolant Temperature (ECT) Sensor 5
Engine Mount [05]
Exhaust Pipe To Exhaust Manifold 20-21
Exhaust Manifold Heat Shield 8-9
Exhaust Manifold To Cylinder Head [06]
Fuel Pump Lock Ring 43
Fuel Rail To Intake Manifold 16-17
Intake Manifold 16-17 [08]
Main Bearing Caps [09]
Oil Filter 15
Oil Filter Adapter To Engine 40
Oil Pan Drain Plug 25
Oil Pan To Engine Block 8-9
Oil Pump 20
Oil Pump 8-9
Oil Pump Pickup Tube 20
Oil Pump Relief Valve Retaining Cap 30
Power Steering Pump 40
Radiator 8-9
Spark Plugs 20
Thermostat Housing 22-23
Throttle Body 18-19
Timing Belt Tensioner [07]
Timing Belt Tensioner Pulley 30
Valve Cover Bolts [04]
Water Pump To Engine 8-9

[01] -- Refer to Balance Shaft, Replace procedure in this section.
[02] -- Torque to 20 ft. lbs., then tighten an additional 1/4 turn.
[03] -- Refer to Cylinder Head, Replace procedure in this section.
[04] -- Refer to Valve Cover, Replace