Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 1997 >> RAM 2500 Van V8-5.2L VIN Y >> Repair and Diagnosis >> Cruise Control >> Cruise Control Servo Cable >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control Servo Cable: Service and Repair

REMOVAL
1. Remove engine cover.
2. Remove air cleaner assembly. Refer to Powertrain Management/Fuel Delivery and Air Induction/Air Cleaner for procedures.

Servo Cable Remove/Install:




3. Using finger pressure only, remove speed control cable connector at bellcrank by pushing connector rearward off the bellcrank pin. DO NOT try to pull connector off perpendicular to the bellcrank.
4. Squeeze tabs on speed control cable and push out of locking plate.
5. Remove servo cable from servo. Refer to Speed Control Servo removal and installation.
6. Reverse removal procedures to install.
pro multis · About Operation CHARM