Fuse Block: Service and Repair

REMOVAL
1. Remove the cluster bezel as described.
2. Remove the two radio mounting screws.
3. Remove the screw that secures the radio ground strap to the instrument panel above the radio.
4. Pull the radio out from the instrument panel far enough to unplug the wire harness connectors and the antenna coaxial cable. If equipped with the Infinity speaker option, also unplug the wire harness connector from the ground terminal on the back of the radio chassis.
5. Remove the radio from the instrument panel.
6. Open the glove box and remove the fuseblock module cover.
7. Remove the two screws that secure the fuseblock module to the instrument panel.
8. Pull the fuseblock module out through the radio opening for service.
9. Reverse the removal procedures to install.