Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 1998 >> Caravan FWD L4-2.4L VIN B >> Repair and Diagnosis >> Cruise Control >> Cruise Control Servo >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control Servo: Service and Repair

REMOVAL
1. Release hood latch and open hood.

Fig. 11 Speed Control Cable End:




2. Disconnect the throttle and speed control cable ends from throttle body.

Speed Control Cable Case And Vacuum Line - Typical:




3. Depress lock tabs holding speed control cable casing to cable mount bracket.
4. Disconnect vacuum line from nipple on air intake plenum.
5. Remove tie wrap holding vacuum line, throttle cable, and speed control cable together.

Speed Control Servo:




6. Remove bolt holding speed control servo to side of battery tray/vacuum reservoir.
7. Remove speed control servo from battery tray.
8. Disconnect wire connector from speed control servo.
9. Disconnect vacuum line from speed control servo that leads to the battery tray/vacuum reservoir.
10. Remove speed control servo.

INSTALLATION
- Transfer speed control cable to replacement speed control servo. Reverse the preceding operation.
pro multis · About Operation CHARM