Lower Instrument Panel Replacement

Lower Instrument Panel:

REMOVAL
1. Remove the right end cover.
2. Remove the steering column bezel.
3. Remove the radio bezel and the HVAC control.
4. Remove the lower console.
5. Remove the convenience cup holder and track.
6. Remove the glove box.
7. Remove the glove box latch striker.
8. Remove the glove box lamp.
9. Disconnect the wire connector from glove box lamp.
10. Remove the screws holding the lower instrument panel to the reinforcement frame around the glove box opening.
11. Remove the screw holding the lower instrument panel to the right side of instrument panel.
12. Remove the screw holding the lower instrument panel to the upper instrument panel at the left side panel above the accelerator pedal.
13. Remove the instrument cluster bezel as necessary to gain access to the lower instrument panel screws.
14. Remove the screw holding instrument panel to the upper panel below the instrument cluster.
15. Remove the screws holding rear of storage pocket to the panel support frame.
16. Remove the screws holding the lower instrument panel to the upper instrument panel from below radio.
17. Remove the screws holding lower instrument panel to the support frame in floor console area.
18. Separate the lower instrument from the upper instrument panel.
19. Disconnect the wire connectors from back of the 12 Volt outlet base.
20. Remove the lower instrument from vehicle.

INSTALLATION
- For Installation, reverse the above procedures.