Automatic Door Locks Disable or Enable

The vehicle comes with two options for power door locks:
- Rolling automatic lock, ENABLE approximately at 16 mph.
- No rolling automatic lock, DISABLE.

To change the automatic door lock selection, do the following:
1. Close all doors.
2. Place the ignition key in the OFF position for 20 seconds or more.
3. Turn ignition key to the run position and to the OFF position without cranking the engine four times. The malfunction lamp will come on each time the key is in the run position.
4. Press the door lock button to lock the doors. This procedure reverses the automatic door lock option, Enable to Disable, or Disable to Enable. If the present option is undesirable, repeat to arrive at the desired option