Cooling System Flow Check
RADIATOR COOLANT FLOW CHECKUse the following procedure to determine if coolant is flowing through cooling system.
1. Idle engine until operating temperature is reached. If upper radiator hose is warm to the touch, thermostat is opening and coolant is flowing to radiator.
WARNING: Hot, pressurized coolant can cause injury by scalding. Using a rag to cover radiator pressure cap, open radiator cap slowly to first stop. Allow any built-up pressure to vent to the reserve/ overflow tank. after pressure build-up has been released, remove cap from filler neck.
2. Drain a small amount of coolant from radiator until ends of radiator tubes are visible through filler neck. Idle engine at normal operating temperature. If coolant is flowing past exposed tubes, coolant is circulating.