Marker Lamp: Service and Repair

REMOVAL

Park Lamp Screw:

1. Remove torx screw attaching park lamp to headlamp module.
2. Pull the park and turn signal lamp outward and separate from headlamp module.

Park And Turn Signal Lamp Bulb:

3. Remove park and turn signal sockets from back of lamp.
4. Remove side marker socket from back of lamp.
5. Separate park and turn signal lamp from vehicle.

INSTALLATION
1. Install side marker socket in back of lamp.
2. Install park and turn signal sockets in back of lamp.
3. Using the guides on the bottom and side of the headlamp module, align the park and turn signal lamp under headlamp module.
4. Slide the park and turn signal lamp inward under headlamp module. Push firmly until the lamp is seated.
5. Install screw attaching park lamp to headlamp module.