Instrument Panel Top Cover Replacement

Instrument Panel Top Cover:

REMOVAL
1. Remove A-pillar trim.
2. Using a trim stick, disengage clips holding rear edge of top cover to instrument panel.
3. Disconnect wire harness from message center.
4. Pull top cover rearward to disengage hooks holding front of top cover to instrument panel.
5. Remove top cover.

INSTALLATION
1. Place instrument panel top cover in position on vehicle.
2. Push top cover forward to engage hooks to hold front of top cover to instrument panel.
3. Connect wire harness to message center.
4. Engage clips to hold rear edge of top cover to instrument panel.
5. Pull top cover rearward.
6. Install A-pillar trim.