Tightening Specifications

TORQUE CHART

DESCRIPTION TORQUE

A/C Compressor Mounting
Compressor Bracket to Water Pump Bolt 41 Nm (30 ft. lbs.)
Compressor to Bracket Bolt 68 Nm (50 ft. lbs.)
Compressor Support Bolt 41 Nm (30 ft. lbs.)
Camshaft Sprocket
Bolt 54 Nm (40 ft. lbs.)
Camshaft Thrust Plate
Bolt 12 Nm (105 in. lbs.)
Connecting Rod
Nut 54 Nm (40 ft. lbs.) + 3/4 Turn
Crankshaft Damper Pulley to Crankshaft
Bolt 54 Nm (40 ft. lbs.)
Cylinder Head
Bolts Refer to Cylinder Head Removal and Installation Procedure.
Cylinder Head Cover
Bolts 12 Nm (105 in. lbs.)
Exhaust Manifold
Bolts 23 Nm (200 in. lbs.)
Exhaust Crossover Pipe Flange
Fasteners 33 Nm (25 ft. lbs.)
Generator Mounting
Adjusting Strap Bolt 23 Nm (200 in. lbs.)
Adjusting Strap Mounting Bolt 41 Nm (30 ft. lbs.)
Bracket Bolt 41 Nm (30 ft. lbs.)
Pivot Nut 41 Nm (30 ft. lbs.)
Intake Manifold
Bolts 23 Nm (200 in. lbs.)
Intake Manifold Gasket Retaining
Screws 12 Nm (105 in. lbs.)
Intake Manifold Plenum
Bolts 28 Nm (250 in. lbs.)
Main Bearing Cap
Bolts 41 Nm (30 ft. lbs.) + 3/4 Turn
Oil Filter Attaching
Nipple 41 Nm (30 ft. lbs.)
Oil Pan
Bolts 12 Nm (105 in. lbs.)
Drain Plug 27 Nm (20 ft. lbs.)
Level Sensor Plug 41 Nm (30 ft. lbs.)
Oil Pressure Gauge Sending Unit 7 Nm (60 in. lbs.)
Oil Pump
Cover Bolts 12 Nm (105 in. lbs.)
Pick-up Tube Bolt 28 Nm (250 in. lbs.)
Rocker Shaft Bracket
Bolts 28 Nm (250 in. lbs.)
Spark Plug 27 Nm (20 ft. lbs.)
Starter Mounting
Bolt 68 Nm (50 ft. lbs.)
Strut-Intake Manifold to Cylinder Head
Bolt 54 Nm (40 ft. lbs.)
Tappet Retainer Yoke
Bolt 12 Nm (105 in. lbs.)
Temperature Gauge Sending Unit
Sender 7 Nm (60 in. lbs.)
Timing Chain Case Cover
Bolt-M8 x 1.25 27 Nm (20 ft. lbs.)
Bolt-M1O X 1.5 54 Nm (40 ft. lbs.)
Water Pump to Chain Case Cover
Bolts 12 Nm (105 in. lbs.)